Home
How it works
Fibo-Box.
The only way to turn your motorised dish system by PC without a receiver. And control the rotory LNB unit.
Fibo-Box is designed to move your
motorised dish with your PC or laptop without a receiver or PC card.
How it
works:
The motor/actuator gives out a electrical
pulse when it moves.
This is the basics of the positioning system for
Fibo-Box
With these pulses the Fibo-box knows exactly where your
motor/actuator position is and you can then send it to a new position or
satellite.
It knows precisely where that new position is. For example from 7
East to 10 East are 21 pulses.
This control is done by the Fibo-box
unit,the Fibo-box will communicate with the PC program by a USB cable.
You
send the commands by a program you see here in Photo.
New satellite
positions can be stored any time and also the position East or West.
There is
a visual control in right corner and you can see where the motor is positioned,
if there is something wrong you can use the stop
command using the stop
button and can continue after resetting it.
Version
3 can handle 2 motors separately so you can use it for many things like the
actuator for
up and down axis movement and also the Jaeger 1224 or to turn a
second dish. And it can control the rotory
lnb unit, what can controlled and use via USB cable power.
Version 4 Have autotracking and control.
We can make the rotory unit for all LNB's.
You now understand how you can turn your dish system
without a receiver.
It can be used with Fibo-Motors, Actuators and all
motors that use reed switches or opto-couplers.
It is also possible to use
Diseqc motors, but there needs to be a small modification
done.
For Orders,Contact and Information about parts